Comms Room and Data Centre Cooling Solutions

Reliable and energy efficient technical cooling solutions that meet the demands anywhere from a small single comms room to a large commercial data centre.

In the unlikely event of a system failure, high end installations are designed with a backup system. When the running system fails, it will tell an interface to automatically start the second, or backup system. This  is all 100& automatic and an emergency repair alert can be sent out to whoever it may concern.

When a space is cooled down using refrigerant, the warmth from the room needs to be exhausted away – usually atmosphere. However a Heat Recovery system is designed to capture this waste heat and utilise it elsewhere in the building e.g. hot water or comfort heat other rooms.

Duty rotation comes standard with many manufactures such as Daikin and Mitsubishi Electric. After set periods of time, the operating unit goes into standby mode, and the unit currently in standby mode takes over. This feature maximises the lifetime of each system, while also increasing efficiency. Duty Rotation can also be set up with the failsafe interface technology described above – increasing overall longevity, efficiency and reliability.

Comms Rooms and Data Centres need climate control 24/7 – without this some simply stop working. Cooling systems installed in these environments are designed to maximise uptime in a wide range of conditions, from temperatures as low as -15°C and and some as high as 50 °C.

Due to the nature of Cooms Rooms and Data Centres, they produce large amounts of heat if not correctly managed. Due to this space producing a large amount of heat, energy hungry units are often installed to cool the area down to the desired operating temperature. There are however a number of cooling solutions which are engineered to provide year-round cooling, whilst also focusing on efficiency and decreasing your annual running costs.

The free cooling mode reduces energy consumption due to utilising cool outdoor air during the winter months. this allows refrigerant-based cooling compressors to shut off or operate at a much lower capacity, which as result saves reduces electricity running costs.